As it turned out, many do not quite understand, or do not understand at all, why hookah valve. Someone thinks that this “thing” is for the hookah man, so that he rehabilitates the hookah, and it is not necessary to use it himself. There are also individuals who, with a smart look, begin to turn the valve with the wording: “We do this so that the thrust is normal.”
First, let's look at the purpose of the valve. It is designed to purge a hookah: you blow into the pipe, and excess air from the flask leaves through this very valve so as not to create strong pressure on the water, otherwise it will rise along the shaft and spoil your tobacco. And why blow a hookah at all? The fact is that even with the presence of a valve, pressure on the water still takes place, because. there is still some resistance at the valve, and the column of water still rises through the shaft, but this pressure is not enough for the water to reach the bowl. So, this "rising" water pushes the air out of the shaft, which is there, which exits through the bowl and thereby cools the tobacco inside.
When should the hookah be blown? In general, a stable blowdown after several draws will help to stabilize the temperature in the bowl, i.e. prevent overheating. In general, the “wake-up call” is the feeling that the tobacco has begun to burn and the bitterness inherent in this. In such a situation, the first step is to get rid of excess heat: remove the coal, remove the cap, etc. Then blow the hookah well. This does not always save: there is tobacco that is very difficult to restore; or the tobacco may have already been burned.
The valve is present on almost all modern hookahs, but their design and, accordingly, their resistance may be different. Those. if you blow too hard into the same one, there is still a chance to fill the bowl; but it has a very “light” valve, and no matter how hard you push, it’s impossible to fill it.
The standard element of the valve is a ball inside it, which, when inhaled, clogs the purge hole, and when pressure is applied to it from the inside, it opens it. When this ball is made of metal, it tends to rust and “stick” into the hole, which will prevent blowing. If this happens, you should either unscrew the valve and adjust the ball, or hit the valve with something like a metal mouthpiece.
To prepare the device correctly. There are also those who will not miss the opportunity to twist the intricate element themselves.
First you need to understand its immediate purpose. The valve in the hookah is used to purge the smoking device: by blowing into the hose, you get rid of the smoke accumulated in the flask.
It is also used in the following cases:
- if you feel bitterness when smoking;
- an unpleasant aftertaste appeared due to the stagnation of smoke in the flask.
Such equipment appeared not so long ago. Some hookah smokers, who have just discovered this type of pastime, are still wondering: “Why is there a valve in the hookah?” All modern devices are equipped with this small detail that contributes to a pleasant smoking experience. Imagine the situation: you are smoking a hookah in the company of friends, one of whom takes too deep puffs. This results in a bitter taste. To eliminate the trouble, just blow the hookah. And the valve will become an indispensable assistant in this matter, because it is he who will release the air.
For proper operation of the hookah device, it must be blown in time. This process is one of the most important when smoking. At this time, the part opens the hole so that the smoke comes out, and during tightening it closes it, while avoiding loss of tightness inside. The ball valve in the hookah blows through the bowl and does not raise the water if you do not blow hard into the hose. It also helps to remove stagnant steam from the flask.
It is also worth considering that how often you blow a hookah, the duration of its smoking will not increase. Even the best hookah loses its taste after 50 minutes. Therefore, if it seems to you that, using the purge, you can smoke for an hour and a half or more, then you are deeply mistaken.
They often try to turn the valve in a hookah, believing that this is a heat regulator for coals. It's definitely not worth doing. So, if you suddenly feel bitter when smoking a hookah, this means that it's time to blow it out. To do this is quite simple. It is only necessary to blow air inside through the hose, during which time the heat will come out of the bowl, it will cool, and the valve will release excess steam from the flask. Thus, you will get rid of burning, or, as they say in narrow circles, “reanimate” it. The obvious advantages of this detail include the following:
- removal of smoke from the flask;
- no air inside;
- the ability to get rid of burning.
Where to buy the item?
After another evening, together with friends, some of the guests unscrewed the valve, and the ball seemed to fall through the ground. Where to get a new one? You can buy it in any store specializing in sales of hookahs and accessories for them. One of these options is "World of Hookahs". Here you will find all the necessary accessories. We are working to provide you with the most enjoyable hookah smoking experience!
Remember that this part must be either open or closed. When smoking, make sure that it is tightly screwed on. It may happen that the valve is so tight that it no longer allows smoke to escape. In this case, you can screw it on, or call a hookah maker if you are not confident in your own abilities. There are situations when the ball in the valve sinks. The reason for this is the settling of water in the purge hole, which provokes the sticking of the part. To eliminate this, disassemble the valve, pull out the ball and wipe everything with a dry cloth (the ball itself and the hole). This manipulation will help return the element to working condition. Take into account the importance of this detail, because without it you will hardly be able to enjoy smoking.
HOW AND WHY TO BLOW THE HOOKAH AND WHAT IS THE BLOW VALVE IN THE HOOKAH
WHY YOU SHOULD BLOW THE HOOKAH AND HOW TO DO IT CORRECTLY
Hookah models are usually equipped with a purge valve, but not all owners pay attention to it and know why to purge a hookah. Often beginners are not even aware of such a function, but it is important for normal smoking. And if something is wrong with tobacco, for example, it is bitter for no apparent reason, it may be necessary to blow the hookah to correct the situation. It is not difficult to do this, so there will be no problems, but the taste and sensations will be better.
FEATURES OF USE
Not everyone knows how to blow a hookah, and also that it is worth doing it as often as possible. Then the tobacco will warm up more evenly, respectively, it will be possible not to be afraid of bitterness while smoking.
- How to use the purge valve in a hookah? This is not difficult. Approximately for every ten puffs while smoking, you need to exhale one breath into the puff hole. This allows the accumulated gas to be removed. It is also worth blowing slowly and smoothly, do not exhale sharply with all your strength, from this the water can begin to be understood along the shaft. In addition, it is better to first check if the ball in the valve is stuck, otherwise there is a risk of pouring water into the hookah bowl during this process.
- If everything is in order with the valve and it is in good condition, then the excess air will come out after purging, the tobacco will no longer overheat and become bitter. You need to blow the hookah for about ten seconds, this is enough for the bowl to cool.
- How to check the valve before smoking? To do this, you need to assemble a hookah, but do not put a bowl on it yet. At the same time, close the shaft from above with your hand and try to inhale through the hose. If the valve is closed during the test, then air should not flow at all when inhaling.
- Sometimes a ball sticks in the valve, this is due to the fact that resins accumulate from the smoke, which create problems. In this case, it is necessary to thoroughly rinse the structure, and then return everything to its place in order to use the hookah again.
Blowing a hookah is not difficult at all, but this method allows you to smoke without bitterness, which is very important. If you periodically blow the hookah, then the sensations will be much more pleasant, so you should not miss this opportunity. In order for the method to work, it is necessary to observe the above frequency of purge, and it is also better not to leave the hookah for a long time while smoking, do not make long pauses.
Almost every beginner makes mistakes when they first try to cook hookah. At first, did your hookah often taste bitter, burnt, or dragged heavily? Then you know what this article is about.
And, sitting in a cafe on a comfortable chair with 4 burnt holes in it, you will see guys next to you who put two coals in the very center of the bowl and then pull the hookah towards them by pulling the hose. Terrible, right?
And this is only in the hookah bar. Can you imagine what such craftsmen can do when trying to make a hookah at home on their own? :)
We've seen guys trying to move the coals by hand, forgetting to use foil, pouring water into the flask, or filling the flask all the way to the top.
So, to make sure you and I don't harm our hookahs and our reputation, I've put together this list of the most common hookah making mistakes. These mistakes are the hallmark of beginners. Let them read and you can stop yourself and them from making unjustified mistakes and wasting time and money.
Mistake #4: Charcoal and bowl
Filling a cup with tobacco like a pro is no easy task. There are quite a few subtleties, and a huge amount of room for error. The topic of errors when working with a bowl is worthy of a separate large article.
Here are the top 6 mistakes when working with a bowl and charcoal:
- Too much tobacco in the bowl
- Too little tobacco
- The absence of holes in the foil (yes, this happens!)
- Quick-burning coals, not fully heated
- An attempt to heat natural coals as quick-fired
- No foil or paper side foil
Mistake #3: Where is the water?
If you are a regular hookah smoker, forgetting about the liquid seems like nonsense to you. But many beginners, bogged down in filling the bowl, completely forget to pour water into the flask. This of course means that there is no liquid to cool the smoke. Hot, sharp smoke goes straight into your mouth. Horror!
Many of those who do not forget about the liquid do not know how much it is needed. They are out of proportion, which means either the presence of harsh smoke or the problem of water in the hookah. The ideal amount of water is 2-3 centimeters above the bottom of the down tube (the part of the hookah that is inside the bulb).
Mistake #2: Playing with fire
Whether it's forgetfulness or testosterone, many hookah lovers love to fool around with hot coals. This usually results in burns on furniture, the floor, or friends.
The biggest piece of advice here is don't use your hands. Our body has a certain reflex when feeling strong heat, which can lead to the flight of coals to the floor. Instead, use tongs when adjusting the heat.
And, if you see the coals falling, just let them fall. We have seen a few instances where we tried to catch the coals but only burned our hands and then the coals fell to the floor anyway.
And, of course, do not move an already prepared hookah. This often results in the coals or the bowl, or even the entire hookah, falling off.
Mistake #1: Catastrophe
The hookah valve allows you to get rid of stagnant smoke in the hookah, so that your hookah will always be fresh and tasty. Great invention, but not all hookahs have it. And not all smokers know how to use it.
A typical disaster scene looks like in the following way:
The smoker tries to blow out the smoke with the back draft. But either because the hookah does not have an air valve or the ball bearing is stuck, the smoke does not come out.
So the smoker blows harder and harder and BOOM! Water, air, smoke shoots upward from the hookah from all sides, douses all smokers with a terrible smelling liquid and sometimes burns them with hot coal.
To avoid this, always blow softly. If smoke does not come out, check that the valve is not blocked.
So let's follow the process of evolution, and learn from the mistakes of those who started smoking hookah long before us. Prepare your bowl properly, fill your flask with water, treat hot coals with respect, and blow lightly through the valve.
Follow these rules and your hookah will remain amazing and enjoyable.
Send us your news and we will be happy to post them on our website.
Our e-mail: This email address is being protected from spambots. You must have JavaScript enabled to view.
Nowadays, hookah has gained great popularity, and the market pleases with a variety of brands. The most important part of the hookah is the shaft. The price depends on the mine. What exactly affects the price of a mine? We will talk about this in detail.
Brand
The first thing that affects the price of a hookah shaft is the brand under which it is produced. Even two absolutely identical products of different brands can vary greatly in cost.
The country
The second factor is the country of origin. It's all about the unstable exchange rate. If, for example, in Germany mines for 250 euros are considered not expensive and budget (the norm), then for us a mine for 17250 (250 euros) is already a high price. If the euro grows a little more, then the price for many Russian consumers will not be affordable at all.
That is why we have so much demand for mines from Russian producers, the prices for which are optimal and fixed for Russia.
Material
Naturally, the price of the mine also depends on the material from which it is made. There are several main variations:
1. Aviation aluminum
2. Stainless steel
3. Combination of aircraft aluminum and stainless steel (perhaps caprolon base)
The most budget option is an aluminum shaft, for example, like ARTKALYAN NK-186. This material is quite easy to process and relatively inexpensive.
More expensive will be aluminum shafts with the addition of stainless steel parts, such as a stainless steel submersible shaft. The fact is that steel is much more expensive and more difficult to process.
And the most expensive option is a shaft made entirely of stainless steel, as they say in the common people "full stainless". Accordingly, more "nerzhi" - more expensive hookah. Also, there are stainless steel hookahs with an admixture of titanium, their price is even higher. An example can be seen on the Pharaon Triple Decker 117 hookah
The next factor in pricing are technological solutions. Every day the mines are becoming more and more perfect and all innovations entail an increase in prices.
Consider examples:
1. Internal valve
If earlier all hookahs had a valve screwed into the base (sticking out of the base), now many manufacturers have abandoned this design. At the moment, more and more often you can find a hookah with a disguised inside the base (internal) valve. This design is considered more aesthetic and convenient. The process of manufacturing an internal valve is more complicated than an external one, and, accordingly, the price is higher.
2. Integrated hose connector or magnetic port
With this equipment, you no longer have to use seals. In the first case, the connector is already screwed into the port and you just have to put a silicone hose on it, in the second case, you just need to bring the connector to the port. Another detail, another price increase.
3. Diffuser
A small but very important detail. At the moment, almost all manufacturers make diffusers for their shafts, which also come in different types: cuts, holes, or a removable diffuser.
4. Type of connection with the flask: seal, thread or click system
The simplest type of connection is a seal (the shaft is simply inserted into the flask), the most complex type of connection is the click system (special latches that fix the shaft, the flask in one position and ensure tightness).
5. Accessories
Holders for a hose or mesh on a saucer (so that there is oxygen between the coal and the saucer to support combustion)
In addition, the final price of a mine is strongly influenced by its size. That is, for a shaft measuring, for example, 50 cm, one amount of metal is needed, and for a shaft of 70-75 cm, one and a half times more of this material is needed. Plus, more material, more work in manufacturing. Accordingly, high hookahs can cost more.
Decor
This is also an important factor in pricing. Nowadays, there are a large number of manufacturers of mines, various designs and shapes. In the black, there will be a manufacturer who can hook a large audience.
Quality
No matter how beautiful the hookah is, in 2017, people are interested in a quality product with a long service life. And the quality directly depends on the material, the quality of processing, attention to detail.
Package
The final factor affecting the price of the mine will be its packaging. What would you like to get your hands on? A shaft in bubble wrap, a shaft in a box, or a shaft, for example, in a beautiful, designer, wooden box? Most likely, many will choose the third option, because it not only makes your purchase presentable, but also protects it better. And later, this box can also be used for storing and transporting the mine.
And of course, making such a box is more expensive than wrapping the shaft with foil. Which also increases its price.
