Increase the battery life of the iPhone here and now - only proven ways.
The capacitance of the iPhone batteries is growing, but IOS does not become more optimized in terms of energy consumption and therefore, one of the most discussed users of Apple smartphones is still associated with the problems of the quick discharge of the iPhone. In this material, we have collected all the proven methods that allow you to enlarge the battery life of the iPhone here and now and extend the life of the smartphone battery in the future.
About iPhone batteries
In all modern devices, Apple uses lithium-ion batteries. Compared with traditional, such as nickel-metal-hydride batteries, they have a number of advantages. Lithium-ion batteries weigh less, have a large capacity and a short charge time, and most importantly - they are durable. The last statement is true, provided that the batteries are operated correctly.
How to extend the life of the iPhone battery life
There are several basic rules, following which can significantly extend the life of your iPhone battery life.
1. Do not allow a complete battery discharge
One of the features of lithium-ion batteries is almost the complete absence of the so-called memory effect. Under this concept, the reversible loss of the container is implied, which takes place when the charging mode is violated, in particular, when charging is not fully discharged battery. Since the iPhone battery almost does not have a memory effect, to charge the smartphone is highly recommended before it turns off due to the lack of charge.
If we talk more specifically, you must connect the iPhone to the charger when the battery charge level is lowered below 10-20%. How much will it help? Experts found out that the amount of lithium-ion battery life due to such a ratio increases to 2.5 times. But more useful for the battery and at all.
2. Do not overheat and supercooling
Heat and cold are the most evil enemies of lithium-ion batteries. Overheating and hypothermia of the iPhone can significantly reduce the capacity of the smartphone battery, so in no case should it be kept in adverse conditions.
For the completeness of this manual, we note that used without a threat to the life of the battery, the iPhone can at a temperature of from 0 to 35 ° C. Stored - at temperatures from -20 to 45 ° C.
3. Use the original charger
In the case of iPhone, this item is especially important. Original charging for Apple smartphones is expensive, and Chinese alternatives, on the contrary, will be enhanced by their availability. However, it is better to pay a round sum once than a few months later to type in the search query "Why my iPhone is so quickly discharged."
What are so bad non-original charging for the iPhone? Cheap chargers for the most part are made on the knee. The network presents hundreds of Chinese charging disassembly, which show that the craftsmen from the consecable above the design of their two-dollar accessory are absolutely not strained. The quality of the assembly of such charging is extremely low, and power is two times less than that of Apple models. In addition, insulation is quite often very lame, and therefore such accessories simply are dangerous for life.
4. Tell the iPhone once every three months
If you decide to start firmly to follow (or already follow) the first advice, then you need to know something else. The total charge of lithium-ion batteries for a long time is also harmful as the constant discharge to zero. Due to the fact that the charge process for most users is random (we charge our iPhone at the first convenient case), the specialists strongly recommend performing the full discharge of the iPhone once every three months. And to do it in a special way.
After a long-lasting iPhone without shutting down, the smartphone must be completely discharged, after charging up to 100% and hold an additional 8-12 hours on charging. Such a simple trick will allow you to reset the so-called upper and lower battery charge flags.
5. Charge the iPhone without a cover
Some IPhone Covers can help overheat a battery that adversely affects its containers. Define whether your case is influenced by the smartphone very simple. If you notice that the iPhone is greatly heated while charging, the first thing to remove it their covers.
How to store iPhone
Separately, it is worth talking about how to store unused iphone correctly. By sending an old iPhone to the far regiment, take care that the charge level of its battery is 30-50%. Long-term storage of the iPhone with a fully discharged battery, eventually entail a decrease in its container, and significant.
How to enlarge offline iPhone time
With the correct operation of the iPhone, to extend its battery, they figured out, go to the most interesting ways - ways to increase the time of operation of Apple smartphones without the need for recharging.
1. Start using energy saving mode
Starting from IOS 9, Apple offered to the owners of the iPhone to use the power saving mode. " Energy saving mode"Allows you to extend the battery life of the iPhone for three extra hours. Activated mode in the menu " Settings» → « Battery».
Due to what "energy saving mode" increases battery life? When it is activated, the performance of the device, network activity is slightly reduced, the effects of motion check, the email check, the background update of the applications, and the animated wallpapers turn into static are turned off. In other words, the main functions of the iPhone does not affect the mode, the smartphone as before it remains to cope with any tasks.
2. Reduce the display brightness
Do not upset ahead of time, it will not be about banal display of the minimum brightness of the display in the menu " Settings» → « Screen and brightness" We will talk about an advanced way to reduce brightness using the settings of the universal access of the iPhone.
Step 1. Go to the menu " Settings» → « Maintenance» → « Universal access».
Step 2. Select " Increase"And turn on the same switch.
Step 3. Three times click on the display with three fingers. A window will open with the zoom mode settings.
Step 4. Install the minimum increase and click " In full screen».
Step 5. Go to the " Select filter"And select" Weak light" To close the settings menu, click on any part of the screen.
Step 6. Go to the menu " Settings» → « Maintenance» → « Universal access» → « Keyboard shortcut"And check the checkbox" Increase».
As a result of the application of these settings, you get the opportunity for a triple click on the home button to install the minimum brightness on the iPhone. The display will start less loading the battery and the smartphone will be able to work longer. To exit the minimum brightness mode, you must press the home button three times.
3. Set the minimum display location time
Simple, but extremely useful tuning. On the menu " Settings» → « Screen and brightness» → « Autoblocking»Check box at" 30 S." This will allow the iPhone display to be automatically blocked after 30 seconds inaction.
4. Turn on the "Reduction of Movement"
In the settings of universal access there is another option, the activation of which has a positive effect on the battery life of the iPhone. We are talking about the "Decrease of Movement" parameter, which reduces the motion of the user interface by incorporating the parallax on the icons. The iPhone does not spend its resources to reproduce excess animations, keeping them for more useful tasks. Turns on " Reducing motion" on the menu " Settings» → « Maintenance» → « Universal access».
5. Turn off the background content update
The larger on your iPhone applications, which for any information refer to the Internet, the faster the smartphone is discharged. Fortunately, with their activity very easy to figure out. Go to the menu " Settings» → « Maintenance» → « Content update"And disable the applications, which you want to ban the background activity.
6. Disconnect unnecessary pop-up notifications
Each notification from the application on the iPhone activates the display, which is known to consume the battery resources are the strongest. That is why it is recommended to keep a list of applications with pop-up notifications included in order. Go to the menu " Settings» → « Notifications"And disable notifications from unnecessary applications.
7. Use advertising blocker in Safari
If you actively use the Safari browser on the iPhone, any block player of advertising will help to increase the battery life. Many do not know, but advertising inserts and pop-up banners on sites are an additional and not the weakest load on the device. The App Store presents a large number of free advertising blocker, for example, Adguard .
8. Turn on the "airrest" when the mobile network signal is weak
When the iPhone cannot establish a stable connection to the cellular network, it begins to send signals to the communication operator at once. This operation, the smartphone spends a lot of effort, and, accordingly, the battery charge. To prohibit the iPhone without stopping, sending signals to the communication operator with a bad connection allows "airrest".
9. Disconnect the automatic search Wi-Fi
By default, the iPhone is constantly in the search mode of available wireless networks, which most often users are not required. At the charge of the battery, scanning affects very much, of course, for the worse. Fortunately, turn off the automatic search of Wi-Fi networks. To do this, go to the menu " Settings» → Wi-Fi and translate switch " Request for connection"In an inactive position.
10. Disconnect Airdrop
The AirDrop function allows you to simply exchange files between Apple devices, but not all use it. If you are not using AirDrop, boldly open " Control point", Click on Airdrop and select" Receive off"In order for the function to stop in vain to spend the battery charge.
11. Conbate some applications to enjoy geolocation services.
A huge number of applications use iPhone geolocation services. And quite often - water. But the tracking of his location with a smartphone is the process of extremely resource-proof. Fully disable geolocation services, of course, it is not recommended, but it is worth it to use specific applications. Go to the menu " Settings» → « Confidentiality", Select an application that should not be able to use geolocation services and click" Never" Come on the entire list of installed applications and leave the permitted function with the function only really important tools, for example, navigator.
Increase the battery life of the iPhone here and now - only proven ways.
The capacitance of the iPhone batteries is growing, but IOS does not become more optimized in terms of energy consumption and therefore, one of the most discussed users of Apple smartphones is still associated with the problems of the quick discharge of the iPhone. In this material, we have collected all the proven methods that allow you to enlarge the battery life of the iPhone here and now and extend the life of the smartphone battery in the future.
About iPhone batteries
In all modern devices, Apple uses lithium-ion batteries. Compared with traditional, such as nickel-metal-hydride batteries, they have a number of advantages. Lithium-ion batteries weigh less, have a large capacity and a short charge time, and most importantly - they are durable. The last statement is true, provided that the batteries are operated correctly.
How to extend the life of the iPhone battery life
There are several basic rules, following which can significantly extend the life of your iPhone battery life.
1. Do not allow a complete battery discharge
One of the features of lithium-ion batteries is almost the complete absence of the so-called memory effect. Under this concept, the reversible loss of the container is implied, which takes place when the charging mode is violated, in particular, when charging is not fully discharged battery. Since the iPhone battery almost does not have a memory effect, to charge the smartphone is highly recommended before it turns off due to the lack of charge.
If we talk more specifically, you must connect the iPhone to the charger when the battery charge level is lowered below 10-20%. How much will it help? Experts found out that the amount of lithium-ion battery life due to such a ratio increases to 2.5 times. But more useful for the battery and at all do not lower its charge level below 50% .
2. Do not overheat and supercooling
Heat and cold are the most evil enemies of lithium-ion batteries. Overheating and hypothermia of the iPhone can significantly reduce the capacity of the smartphone battery, so in no case should it be kept in adverse conditions.
For the completeness of this manual, we note that used without a threat to the life of the battery, the iPhone can at a temperature of from 0 to 35 ° C. Stored - at temperatures from -20 to 45 ° C.
3. Use the original charger
In the case of iPhone, this item is especially important. Original charging for Apple smartphones is expensive, and Chinese alternatives, on the contrary, will be enhanced by their availability. However, it is better to pay a round sum once than a few months later to type in the search query "Why my iPhone is so quickly discharged."
What are so bad non-original charging for the iPhone? Cheap chargers for the most part are made on the knee. The network presents hundreds of Chinese charging disassembly, which show that the craftsmen from the consecable above the design of their two-dollar accessory are absolutely not strained. The quality of the assembly of such charging is extremely low, and power is two times less than that of Apple models. In addition, insulation is quite often very lame, and therefore such accessories simply are dangerous for life.
4. Tell the iPhone once every three months
If you decide to start firmly to follow (or already follow) the first advice, then you need to know something else. The total charge of lithium-ion batteries for a long time is also harmful as the constant discharge to zero. Due to the fact that the charge process for most users is random (we charge our iPhone at the first convenient case), the specialists strongly recommend performing the full discharge of the iPhone once every three months. And to do it in a special way.
After a long-lasting iPhone without shutting down, the smartphone must be completely discharged, after charging up to 100% and hold an additional 8-12 hours on charging. Such a simple trick will allow you to reset the so-called upper and lower battery charge flags.
5. Charge the iPhone without a cover
Some IPhone Covers can help overheat a battery that adversely affects its containers. Define whether your case is influenced by the smartphone very simple. If you notice that the iPhone is greatly heated while charging, the first thing to remove it their covers.
How to store iPhone
Separately, it is worth talking about how to store unused iphone correctly. By sending an old iPhone to the far regiment, take care that the charge level of its battery is 30-50%. Long-term storage of the iPhone with a fully discharged battery, eventually entail a decrease in its container, and significant.
How to enlarge offline iPhone time
With the correct operation of the iPhone, to extend its battery, they figured out, go to the most interesting ways - ways to increase the time of operation of Apple smartphones without the need for recharging.
1. Start using energy saving mode
Starting from IOS 9, Apple offered to the owners of the iPhone to use the power saving mode. " Energy saving mode"Allows you to extend the battery life of the iPhone for three extra hours. Activated mode in the menu " Settings» → « Battery».
Due to what "energy saving mode" increases battery life? When it is activated, the performance of the device, network activity is slightly reduced, the effects of motion check, the email check, the background update of the applications, and the animated wallpapers turn into static are turned off. In other words, the main functions of the iPhone does not affect the mode, the smartphone as before it remains to cope with any tasks.
2. Reduce the display brightness
Do not upset ahead of time, it will not be about banal display of the minimum brightness of the display in the menu " Settings» → « Screen and brightness" We will talk about an advanced way to reduce brightness using the settings of the universal access of the iPhone.
Step 1. Go to the menu " Settings» → « Maintenance» → « Universal access».
Step 2. Select " Increase"And turn on the same switch.
Step 3. Three times click on the display with three fingers. A window will open with the zoom mode settings.
Step 4. Install the minimum increase and click " In full screen».
Step 5. Go to the " Select filter"And select" Weak light" To close the settings menu, click on any part of the screen.
Step 6. Go to the menu " Settings» → « Maintenance» → « Universal access» → « Keyboard shortcut"And check the checkbox" Increase».
As a result of the application of these settings, you get the opportunity for a triple click on the home button to install the minimum brightness on the iPhone. The display will start less loading the battery and the smartphone will be able to work longer. To exit the minimum brightness mode, you must press the home button three times.
3. Set the minimum display location time
Simple, but extremely useful tuning. On the menu " Settings» → « Screen and brightness» → « Autoblocking»Check box at" 30 S." This will allow the iPhone display to be automatically blocked after 30 seconds inaction.
4. Turn on the "Reduction of Movement"
In the settings of universal access there is another option, the activation of which has a positive effect on the battery life of the iPhone. We are talking about the "Decrease of Movement" parameter, which reduces the motion of the user interface by incorporating the parallax on the icons. The iPhone does not spend its resources to reproduce excess animations, keeping them for more useful tasks. Turns on " Reducing motion" on the menu " Settings» → « Maintenance» → « Universal access».
5. Turn off the background content update
The larger on your iPhone applications, which for any information refer to the Internet, the faster the smartphone is discharged. Fortunately, with their activity very easy to figure out. Go to the menu " Settings» → « Maintenance» → « Content update"And disable the applications, which you want to ban the background activity.
6. Disconnect unnecessary pop-up notifications
Each notification from the application on the iPhone activates the display, which is known to consume the battery resources are the strongest. That is why it is recommended to keep a list of applications with pop-up notifications included in order. Go to the menu " Settings» → « Notifications"And disable notifications from unnecessary applications.
7. Use advertising blocker in Safari
If you actively use the Safari browser on the iPhone, any block player of advertising will help to increase the battery life. Many do not know, but advertising inserts and pop-up banners on sites are an additional and not the weakest load on the device. The App Store presents a large number of free advertising blocker, for example, Adguard .
8. Turn on the "airrest" when the mobile network signal is weak
When the iPhone cannot establish a stable connection to the cellular network, it begins to send signals to the communication operator at once. This operation, the smartphone spends a lot of effort, and, accordingly, the battery charge. To prohibit the iPhone without stopping, sending signals to the communication operator with a bad connection allows "airrest".
9. Disconnect the automatic search Wi-Fi
By default, the iPhone is constantly in the search mode of available wireless networks, which most often users are not required. At the charge of the battery, scanning affects very much, of course, for the worse. Fortunately, turn off the automatic search of Wi-Fi networks. To do this, go to the menu " Settings» → Wi-Fi and translate switch " Request for connection"In an inactive position.
10. Disconnect Airdrop
The AirDrop function allows you to simply exchange files between Apple devices, but not all use it. If you are not using AirDrop, boldly open " Control point", Click on Airdrop and select" Receive off"In order for the function to stop in vain to spend the battery charge.
11. Conbate some applications to enjoy geolocation services.
A huge number of applications use iPhone geolocation services. And quite often - water. But the tracking of his location with a smartphone is the process of extremely resource-proof. Fully disable geolocation services, of course, it is not recommended, but it is worth it to use specific applications. Go to the menu " Settings» → « Confidentiality", Select an application that should not be able to use geolocation services and click" Never" Come on the entire list of installed applications and leave the permitted function with the function only really important tools, for example, navigator.
One of the inevitable features of modern technologies is a constant need for a network feedback. Smartphones and tablets and flax to sockets, as if vampires-goblets to the gentle necks of the lady. An exception did not become the iPhone or iPad battery, which, albeit somewhere close to the limit of technical perfection, but north, make devices more similar to useless bars of metal and glass.
In this embossed article, we will look at a lot of useful and simple tips, how to increase battery life and on small old iPhone 4, and on a small modern iPhone SE, and on a huge iPad Pro. The article is focused on iOS 10, but most tips are also relevant for iOS 7, iOS 8 and iOS 9.
So, we will move from system settings that require calibration to third-party applications that helps the iPhone or iPad battery extend the time of operation. Ahead of 36 exciting and useful steps.
Do not bother the completion of applications
Enable low power mode
We update iOS.
Or maybe a battery life?
Checking the use of the battery
What applications are accumulator?
Facebook.
Give brightness
Automatic blocking
Flight Mode
Turn off Wi-Fi
Turn off Bluetooth
Disconnect Airdrop
Disconnect 3G and 4
Digify the volume
Disconnect vibration
Down with visual effects
Games and heavy applications
Camera
Disconnect the search Spotlight
Center notifications
Stop e-mail sync
Delete unnecessary email accounts
Disable icloud
Disable automatic time zone
Location Definition Services
Disable Hey Siri.
Disable background update content
Disable application update
Display battery charge in percent
Accumulator calibration
How much time did you have left?
Leave your iPhone constantly on charging?
Turn off the iPhone
additional battery
If you are pleased with the owner of the iPhone 6, make sure that everything is in order with your battery, because in November 2016, Apple announced a free battery replacement program for iPhone 6. A sign of such a warranty case is an unexpected shutdown of iPhone 6. If it annoys it, Boldly contact the service service.
Let's start with the spread of a common myth about saving the iPhone or iPad battery. IOS users tend to complete the applications when they come out of them, which seems logical way to save battery charge. But, in fact, this is not such a good idea. According to experts from the Apple Store, when you close the application, it is removed from RAM, so at the next opening it is loaded back there. These loading-loading manipulations cause greater damage to the iPhone than if you just leave everything as it is.
Apple itself in the face of Craig Federigi confirmed that the application closing does not affect the battery. At one time, Tima Cook via email asked the question: "How often do you complete your applications, how much is it necessary for the battery?". Federigi answered for him: "No and no."
So our fears about the exclusion of energy from the battery with unused applications are groundless, because they are updated only in the background, if installed in the background update. If the Background Refresh is not enabled, the programs will not be able to work in the background if they do not only play music, write the sound, use the location detection services or check the VoIP calls, such as Skype.
In iOS 10 (and iOS 9) there is a LOW POWER MODE function, an energy saving mode, which reduces the general nutrition requirements and extends battery life. Apple claims that this mode will allow you to get three additional hours of autonomous operation of the iPhone.
The power saving mode in iOS is not included by default. It is offered to you when the charge of the device is reduced to the threshold of 20% of the battery charge. Include and immediately the battery indicator is orange with red or even greasy, if there is enough energy. The mode automatically turns off when the battery charge reaches 80%.
But you can not wait until your iPhone battery reaches a charge of 20%. It is necessary to enable the power saving mode forcibly, for which it is enough to select "Settings" - "Battery" and move the button there.
The test tests confirmed that Low Power Mode is noticeably saved. According to users, by midnight, in normal iPhone mode, it is discharged to 17%, and with energy saving the same indicator equals 49%. Such savings is achieved by stopping the receipt of mail, Siri, background updating applications, automatic loading and some visual effects. It is surprising that even if all these functions are disabled, low power mode still affects.
This advice only works on the iPhone, not an iPad. IPad has no low power mode.
When problems are starting with iPad or iPhone, including related batteries, one of the most useful and universal solutions - IOS update. Apple uses its regular and free operating system updates to eliminate vulnerabilities, errors and failures, and it is possible that the problem you encountered may be fixed by simple update. As for the battery, then, for example, iOS 10.2.1 solves well-known battery charging buggies for iPhone 6, iPhone 6 and Plus options.
The iPhone batteries do not serve, unfortunately, forever. Sooner or later, the moment occurs when the device must inspect the specialist to make the final verdict. The benefit that iOS 10.2.1 introduces such a useful system as a warning about repairing and replacing the battery. Message reads: "Your battery needs maintenance." So, if you have updated, you can not twitch until you see this message.
There is a good way to make sure that the iPhone or iPad battery is working, or the device itself in the issue of nutrition. This requires a small test.
It is necessary in "Settings" - "Basic" - "Battery" Shook the Battery Loading Report. Here you can compare energy consumption during use and in standby mode. Use time is how much you used the device since the last charge, the standby mode is the total time that has passed since the last charge. Using should be much less than standby mode (if you are certainly not using the iPhone without stopping until you turn it off).
To test the battery, write down the time of use and wait, and then move the device to sleep mode by pressing the on / off button at the top. Five minutes later, see the figures again. If your device works correctly, the use time should have increased less than a minute, and in standby mode - for five minutes. If you see an increase in the time of use, more than a minute, something prevents the phone to sleep, and there is a problem with the leakage of the battery. This check works well, starting with iOS 9.
Most likely, the iPhone battery is sitting due to any application or email settings, and not damage to the device itself and battery.
To stop unnecessary leaks, see the following tips in this article.
In iOS 10, 9 and 8, you can see which applications are the largest battery consumers. Go to "Settings" - "Basic" - "battery" and then below is a visual schedule, which of your applications were the most voracious over the past 24 hours or 7 days. Facebook and VKontakte will most likely be at the top, then safari. Obviously, these are often used applications. It is worth paying attention to any applications that sow the battery with background actions, which will be marked in the table. It is necessary to decide what kind of activity. Let's discuss it below.
Facebook is accused of being putting the batteries on the iPhone and iPad in iOS 9 and even 10. Facebook himself recognizes that his iOS application uses many resources in the background. So, in February of this year, Edition The Guardian wrote that the removal of the Facebook application can save up to 15% of the iPhone operation. At the same time, it is not necessary to abandon the Facebook itself, which can be quite convenient to use the Facebook website through Safari.
Look in the battery life log ("Settings" - "Battery") and see how Facebook battery devour. His share in the discharge can be up to a quarter of the total! Facebook recognized his guilt, and then tried to fix it, but the problems with the discharge of the battery remained.
Retina display that you most likely carry with you on your favorite device, contains a huge number of pixels, more than iMac. Even the number of pixels on the iPhone screen can be compared with MacBook Air. It is not surprising that the screen has become one of the main sources of power consumption in your device on iOS. Retina Display Pixels Lighting Requires a lot of energy. Testing has revealed that excessive screen brightness has become the main cause of the rapid discharge of the iPhone battery.
With the full brightness of the iPhone 5 screen, the discharge lasted 6 hours and 21 minutes during video playback in the 720p resolution. If you remove the brightness of the screen half, the phone has come for 9 hours 48 minutes. The difference is huge.
So save the battery charge, adjusting the brightness of the iPhone. Quick access to this setting is made by the slider in the control center, which is called up from the bottom of the screen. Take the brightness slider to the left until the dimension starts to cause despondency and discomfort. You also need to open "Settings" - "Display and Brightness", where to control the "Auto-brightness" function is disabled so that your phone does not catch the brightness every time he swallows. True, Apple assures that the automatic brightness is just able to save time of autonomous work, so if the manual settings are still too dull on the bright light, then it is likely to leave everything as it is.
In iOS 7, you can find the adjustment in "Wallpapers and Brightness".
While the screen is on, it is inexorably consumes electricity, so you need to make sure that your iPhone or iPad does not wake up when it takes. When setting up for the maximum battery life, you must install automatic locking to the shortest possible 30 seconds. This feature was added only to iOS 9, it is both in iOS 10. Come in "Settings" - "General" - "Autoblock" for iOS 9. and "Settings" - "Display and Brightness" - "Automatic Lock" to translate the device In sleep mode after 30 seconds inaction in iOS 10. This will noticeably extend the battery life, the truth can act on the nerves. In this case, if the forced falling is covered, it is worth only to tilt on half a minute, you will have to get used to press the "Sleep / Awakening" button at the top of the iPhone more often.
The antenna is the largest consumer of energy, since it constantly checks the availability of Wi-Fi and cellular networks. Even if you do nothing, the phone simply discharges the battery in your pocket, because it continuously tracks itself relative to the base stations to switch. If you do not need to call, you are not waiting for a call, do not use the Internet at the moment, you do not need GPS for cards, you can translate the phone to flight mode and save energy to use an iphone antenna. Despite the abundance of "if", still such situations are found quite often, besides, saving for different types of networks can be customized separately.
To activate the "Flight Mode", simply log in to the control screen and tap the airplane icon in the upper left corner. In addition, the flight mode is included in the settings.
If you need to use Wi-Fi, even in the aircraft mode, you can enable it separately, it is only necessary to click on the Wi-Fi icon.
Particularly "flight mode" helps in the low coating zone, since the iPhone in such places supports the antenna power to the maximum. So, in the area with a bad signal, in the basement, your iPhone will desperately try to increase the signal at the expense of the battery.
As Apple Store Genius Scott Lovelace told, your battery will rapidly fall out even if there is strong Wi-Fi, since the phone is still required cellular communication for calls and SMS messages. What, in principle, and a hens clear without such authorities. So do not be surprised if the iPhone office sits faster than, for example, at home, it is not such a hard work, but just a link FIG.
If you need a full-fledged phone, but without Wi-Fi you can do, turn it off (control center and press the Wi-Fi icon). So the phone will discover its search for available Wi-Fi networks and save battery
It should also be remembered that bad Wi-Fi will require more energy to transmit and receive data. But it is still better to use Wi-Fi, if possible than 3G. And the point is not in finance and security, but that the iPhone consumes less energy when accessing Wi-Fi data than when performing the same task in 3G networks. Therefore, Apple brings different battery discharge deadlines for 3G and Wi-Fi. And if the use of the Internet on the iPhone 6 Plus is the same for both options - up to 12 hours, then in the iPhone 6 these indicators differ: 10 hours on 3G and up to 11 hours per Wi-Fi. iPhone 5S and iPhone 5C - 8 hours in 3G networks, up to 10 hours in LTE mode and 10 hours in Wi-Fi. IPhone 4S - 6 hours in 3G networks and 9 hours in Wi-Fi networks.
Most likely bluetooth on your iPhone most of the time is not needed, so it is better to turn it off. Spend on the screen and in the control center, press the icon similar to Runic B. So, after updating the iOS Bluetooth remains on, so you can even not assume that it is active. Bluetooth comes noticeably the battery, so if you do not use it to connect to speakers, headphones or other accessories, feel free to turn it off.
Starting with iOS 7 in the iPhone, Airdrop service is embedded, which requires Bluetooth enabled. This feature allows you to transmit photos and other files to adjacent iPhone. Unfortunately, this service is a battery, due to the fact that it is looking for the nearest smartphones. ARDROP is turned off in the control center, activate this feature only when necessary.
If you can live at the moment without the Internet, but must be connected, disconnect 3G or 4G. Go to "Settings" - "Cellular Network" (or "Mobile Data") and set the Data Switch to "Off.". If your iPhone supports 4G, disconnect this network, especially if you do not use it that also saves the battery.
Usually, the iPhone receives two signals at once: one for calls and SMS, and the other - to transmit data, disconnect unused channels.
It should be noted that, according to Scotty Loveless, the signal strength indicator on the iPhone shows only the signal level for the connection, but not for the data. So, your iPhone can show 2-3 points, and actually have a lousy connection with 3G, with the result that the smartphone will switch to the enhanced search mode and will plant the battery.
Surprisingly, even the volume setting affects the battery life. If you listen to music or other audio from the phone, reduce the level using the volume buttons. At the same time, to save the battery charge can be switched to headphones, which is economically used by the internal speakers of the iPhone. And the most disgrace: Music Equalizer also spends the energy of your battery!
Well, since we dealt with the screen and sound, it remains to save on vibrations. Disconnect, because the arctic sound, without joining, will burn less energy from the battery.
Starting with iOS 7, we are pleased with various volumetric effects, Parallax cute chips, thanks to which icons and notifications are attractively floating on the wallpaper. Beautiful, but they constantly use the iPhone graphics processor, spending precious energy. Extra half an hour of using a smartphone easily go to these grasbats.
Switch to static, not dynamic wallpapers that move when tilting the phone. It sacks a little bit. When you install new wallpapers, turn off the perspective and zoom. You can do this in the "settings" - "main" - "accessibility" and include "reduce movement" to turn off the effects of parallax.
Obviously, the battery of your iPhone is discharged, the faster, the more it is loaded with the applications. Some burn the battery much faster than others, which are intensively used by the processor and graphics accelerator. So 3D games or GPS for cards use much more energy than reading a book.
If you play games with luxurious graphics and visual effects, your iPhone battery will be at your eyes. Therefore, if you are away from the charger and is also waiting for an important call, playing such games will not be the best idea. In fact, even in fairly simple games, a rather complicated three-dimensional engine is often used, and therefore, when the battery in the red feature, avoid them completely.
Probably everyone has when the battery on your iPhone ends when you make a breathtaking night shot with friends? Therefore, if your battery ends, you need to minimize the use of the camera application and the more avoiding the flash.
As with Mac, the iOS constantly works in the background search SPOTLIGHT, indexing your data to easily find them later. This is, of course, great, but when there is little energy, it is better to refrain from indexing. We go to "Settings" - "Main" - "Search Spotlight" and turn off some or all categories Spotlight.
Unfortunately, the notifications do not have a global switch and if energy ends with you, the notification settings have to be changed for all applications. Each time a notification comes, the iPhone screen lights up and sound sound that inevitably consumes the battery. Each message wakes up your device for 5-10 seconds. You can completely live without notifications in non-critical applications, so we go to "Settings" - "notifications" and scroll down the page down. After halfway, in the Include section, there is a list of embedded iPhone applications and third-party applications installed on the phone. Click on each that you are not interested, and choose the option "No" to prohibit the shipment of banners and alerts. You can also delete applications directly from the notification center.
You can configure your iPhone so that it will immediately download the letter from the server and immediately notify its owner, so that he will not miss any new email la. But when your iPhone works away from the outlet on receipt of letters, you can save by checking the mail only when necessary.
The PUSH-notification service constantly polls the server, so when you get a new letter, the iPhone instantly learns about it. You can disable the service in "Settings" - "Mail, Contacts, Calendars" - "Get new data" - "Turn off". Instead, you can choose the receipt of email at certain intervals. Using PUSH for e-electronic requires much more data exchange and battery consumption than selective mail receipt. You can choose: "Every 15 minutes", "every 30 minutes", "hourly" or "manually" to receive letters only on their request.
Several email accounts consume both your precious time, and battery autonomous energy. All of their accounts can be redirected in one postal service, and then delete additional in "Settings" - "Mail, Contacts, Calendars".
Similarly, if we want to squeeze the following portion of the battery juice for yourself, turn off everything that does not really need synchronization via icloud. It uses connection and energy, so you can save the battery charge by turning out unused functions. Go to "Settings" - "icloud" and disconnect everything that you can and even a little of what is impossible.
IPhone can automatically update your time depending on where you are. Since the iPhone determines the exact time through geolocation services, it uses some battery power. So, if you do not fly there, here on time trains, press "Settings" - "Basic" - "Date and Time" and set the "Automatically" parameter to "Off".
Most often, the IOS itself causes the discharge of the iPhone or iPad battery, and the applications that work on it. There are a number of applications that use location detection services on your iPhone, they can play their role to discharge the battery. It's even a little angry, especially when it is not clear what Fig some of them need to know where you are now. To prevent applications to use geolocation services, click "Settings" - "Privacy" - "Geolocation Services" and completely disable them, or deselect any applications that you do not need to access GPS.
Siri slightly reduces battery life, but if this is the "Hi, Siri" service, then the energy breaks even faster, it must be disconnected if you want to increase battery life. Go to "Settings" - "Siri" and make sure that "Hi, Siri" is not included.
This function when activating makes you listen to the phrase "Hi, Siri", and when it hears it, Siri's assistant turns on and preparing for the following commands. It sounds tempting, but constant readiness to hear the magic phrase affects the battery charge. It was for this reason that earlier "Hi, Siri" worked only if the gadget was connected to the charger, but due to popularity, Apple softened this condition when updating iOS.
Before iOS 7, if you switched between applications, double-clicking the "Home" button, the old application frozen and had limited access to system resources. With iOS 7 background applications are allowed to periodically update your data, it inherited iOS 8, iOS 9 and iOS 10. Therefore, when you open the application again, you will immediately see the latest results.
In certain circumstances, this can be useful, but most of the time is wasted by the energy of the battery to the detriment of applications that you really need. Removing the maximum energy from its battery, disconnect the background update of the content. Open the "Settings" - "Basic" - "Content Update". Here you can completely disable this service or reduce the list of applications active in it.
Another feature added to iOS 7 was the ability to update applications without user participation. The function remained in iOS 10, 9 and 8. This feature allows applications to always be relevant, but can plant an iPhone battery. In addition, some users prefer to update the data in each particular case, because sometimes the developer completes its programs in such a way that it becomes only worse. Fortunately, you can stop automatic updating applications. It turns off in "Settings" - "iTunes & App Store", scroll to "automatic download" and disable "updates".
A good habit - track the battery level in percent, and not in the conditional icons on the panel. You can switch in "Settings" - "Battery" - "Battery in percent". Now you will have more detailed information about how much you still have to work your device. True, for reasons, only Apple, iPod Touch has no such opportunity.
If, despite all the tips, the battery life is exhausted earlier than necessary, for example, your iPhone is discharged from 17% to 2% in minutes, the device may need to calibrate the battery. Apple recommends to periodically discharge the iPhone or iPad battery, and then charge it completely - from 0 and to 100 percent. It must be done at least once a month. The process is called calibration and helps the device to more accurate the battery life. The battery calibration ensures that you will be aware of the need to charge the battery. The procedure itself does not prolong the battery life.
There is no simple answer to this question. In iOS 8, it became possible to see which applications became the largest battery consumers, plus we know the percentage of the remaining battery charge and can estimate how much it is enough. But there is no accuracy, which is associated with the dependence of the accumulator from your unpredictable activity.
However, there are third-party applications that can give some more detailed information on how much time left remains. One of these applications is BatteryDoctor (previously BatterySaver) from KS Mobile. This tool offers a wide range of system settings, with an emphasis on battery saving. The main screen of the application shows the assessment of the remaining battery life depending on what is happening in the background, and current system settings.
In principle, BatteryDoctor offers to do everything the same thing that we were viewed above, only he immediately displays the expected effect from manipulations.
When you come to the office, put your iOS devices for charging so that they are fully charged for the way home? But can such a practice of constant recharging iPhone harm the battery? On this occasion there are certain discussions. In general, the iPhone stops charging the battery as soon as the battery is fully charged, so the battery cannot be "recharged" as such. However, from experience with laptops that are connected all the time, it can be seen that their batteries lose the ability to maintain a charge. The only thing here can be advised to be definitely make sure that the battery is discharged to zero at least once a month.
The last tool that will be guaranteed to save energy if the iPhone is needed for whole weekends or turned off the electricity, it is turned off the device when it is not used. First, it will create an obstacle before the temptation to play anything to pass the time. And secondly, it ensures that even background tasks will not pass the power.
However, it should be noted that if only a few percent of the battery charge remains, your iPhone may not turn on again if you turn it off. In such circumstances, switch to flight mode.
If you need even more battery life after tips, you should consider the option with an external battery pack or a housing with a built-in battery. There are many worthy of the attention of devices that will prolong the operation of the iPhone to a substantial lines.
RESULTS
Funefully all 36 listed items are not worth it. It is enough that you got acquainted with them and now understand the main principles of energy saving on their iPhone. Use this information in order to save the battery power, finely and optimally adjusting the device to your needs. Every time the battery will be treacherously sitting at the most inopportune moment, you will approximately know where you could save a little energy and the next time the iPhone's empty battery will be more difficult to catch you surprise.
And thought it was enough for the eyes. However, the former Apple Store support officer who knows about the work of the iPhone much more than any of us, wrote a stunning article on the phone's battery on his blog, which we give below without bills.
I worked at Genius Bar for almost two years and the most difficult problem with which I had to face, there was a short battery life. It was incredibly difficult to find the reason why many batteries discharge very quickly.
I set a goal to find specific reasons for the rapid discharge of the battery on devices with iOS. This article is the result of my long-term research and experience gained during the work of the genius and an IOS specialist, as well as tests conducted on my devices and devices of my friends.
Recently, the released iOS 7.1 brought many changes, including changes in design and improving productivity. However, some users complain about the worsening time of life from the battery and many blogs represent it as a fact.
This will not be another article in the style "Turn off all useful iOS functions." My goal was to present practical steps in order to solve your problems with the battery on iOS.
Before you start, I should notice that 99.9% of the problems with the battery at all are not connected with iOS. I guarantee if you reset the phone to the factory settings so that there are no applications and email on it, it will live from the battery forever. However, no one uses its devices in this way and in fact should not use them. I hope with the help of these steps, life from your iOS battery device will noticeably improve, and you will continue to use all applications and functions that love.
But first need to check if you really have a problem.
How to check the battery life on iOS
With the help of the already built-in test - the indicators use and wait, as well as very simple computing, you can find out if you have a problem. Go to Settings\u003e Basic\u003e Statistics and check your results.
Time in the column use shows how long you actively used your device, waiting, in turn, shows how long the device was in a state of sleep plus use time. The best name for the Count Waiting would be "total working time since the last charge." The main thing is that you need to watch that the time of use was much less than the waiting time. An exception may be the situation when you used the device every second from the moment of disconnecting from charging. If in your case it is not so and your time of use is equal to the waiting time, you have a serious problem. The point is that the time of use should be equal to the time of using the device from the moment of removal from charging.
So, the test: Record the use and wait indicators, click the screen lock button to send the device to the sleep state and set the phone to the side for five minutes. When you return, look at changing the time of work. If your device goes to sleep state properly, the waiting time should have increased for five minutes, and use less than a minute. If your use time will increase more than a minute, you have problems with the time of life from the battery. Something does not give your device to go into sleep state, significantly reducing the battery life.
If you have no such problem, excellent! You have nothing to do with the steps described in this article. But if someone from acquaintances constantly complains about a short time from the battery, continue to read or send them a link to this article.
Below are the main reasons for the rapid discharge of the battery on the iOS, which I found and tips on their elimination.
Step 1: Turn off the geolocation services and update content for Facebook
(Settings -\u003e Main -\u003e Content Update)
The first step may seem very specific, but this is just because it is very often found and is very effective. It was also thoroughly checked and confirmed on many devices.
I got the iPhone 5s about two weeks ago, and it seemed to me that the battery was discharged very quickly. As a gicke, I decided to start the Instruments application in Xcode, Apple Development Environment, in order to find a problem. Instruments is a monitoring of activity for your iPhone, allowing developers to see each process that currently running and how much memory and processor power each application uses real-time.
During the test, Facebook was constantly in the list of active processes, although I did not use it. Therefore, I tried to turn off the geolocation services and updating content for Facebook, and you never guess what happened: the number of percent of the remaining charge increased from 12% to 17%. Wow. I have never seen such on the iPhone. As far as I remember, iPod Touch repeats this behavior, though I have long checked it for the last time. On the iPhone, the level indicators of the remaining charge in percent are usually sequential.
I was able to repeat this behavior on several iPhone with a similar result: if you remove the background functions Facebook, the charge rate increases in percentage.
Poor, Facebook, very bad.
Step 2: Remove Content Update for applications that you are not important.
My recent post explains the advantages of the Content Update function. This is an excellent feature added to iOS 7, but absolutely not necessarily to leave it enabled for all applications that support it. Turn off the content update for Facebook or other applications for which there is no need to update the data constantly.
If there are applications that you open regularly and you trust the quality of the application and the developer, feel free to turn on the content update and enjoy how smartly updated and are ready to use as soon as you open them. Content update is an excellent feature if you need it, but it is not needed for each application on your iOS device.
Step 3: Stop closing applications in multitasking
iOS 7 made the application closing process very pleasant: everything you need to do is press the HOME button twice and take up the application to send it to the digital black hole.
Many say that closing the applications you will increase the battery life, because applications will not work in the background.
Wrong.
Yes, it closes the application, but you don't even guess that you worsen Battery life, if you constantly do it. Let me explain.
Closing the application, you throw it out of RAM. It may seem that this is a useful occupation, but it is not. When you re-open the same application, your device again loads it into memory. This download application in memory and unloading from it loads your phone more than if you left it alone. In addition, as soon as the need for additional memory appears, the iOS closes the applications automatically, so you do the work that your device is already doing for you. The device is intended to ensure that you use them, and did not fulfill the role of the cleaner.
In fact, all those applications that you see in the multitasking menu do not work in the background: IOS freezes them at the moment when you leave the application so that it is ready to work when you want to return. Unless you have turned on content updates, the application is prohibited to work in the background. Exceptions are cases where the application reproduces music, uses geolocation services, records the sound or the most secretive: checks the presence of incoming VoIP calls, as, for example, makes it Skype. All these exceptions, besides the latter, display the icon near the battery indicator, warning that the application works in the background.
Step 4: Temporarilyturn offPush. For email
If the steps 1-3 did not solve your problem, try to check whether the PUSH shutdown will help for email. Push allows your device to receive instant notifications every time you receive a letter. Useful feature, if you need to know when each message comes, but it can adversely affect the charge flow, if it is properly configured.
I saw many devices on which Push was the main reason for the discharge of the battery, but I also saw many devices with PUSH included, which had a great battery life. In fact, it all depends on server settings and a specific email. Try to change the settings for the sample for each hour, thirty or fifteen minutes and see if the rapid discharge of the battery will cease. If it does not help, turn on Push back. You can also try to turn off PUSH for individual accounts if you have several of them. Just check with the above the described test whether it helped to solve your problem.
Incredibly often especially with Email Exchange, the situation occurs when the phone is as if loops, constantly checking the mail. When this happens, the device is discharged in about six hours and indicators Waiting and use in settings\u003e Basic\u003e Statistics will be identical. These values \u200b\u200bare the same not because "the firmware is damaged, but because the phone constantly checks for the presence of new mail and does not give the phone normally go to sleep state.
Step 5: Turn offPush. Notifications for applications that take you
Do you know the situation when the game that your child installed is constantly sending notifications to buy a sheep for online farm? If so, then every time you get such a notification, your phone wakes up for a few seconds to turn on the screen and waiting for your potential action.
Default notifications are not the cause of too fast battery discharge, so do not rush to turn them off all. However, each message wakes up your device for 5-10 seconds and it can accumulate. If you get 50 notifications per day and do not do anything with them, it adds from 4 to 8 minutes by time to use, which, in turn, reduces the time you can use your device.
Turn off these annoying notifications for applications from which you do not want to receive them. The difference may seem small, but over time accumulates.
Step 6: Turn off the percentage of battery charge
You did not hear.
Turn off the percentage of the battery charge and stop worrying about the discharge of the battery. You can find it in Settings\u003e Basic\u003e Statistics, right above the time of work from the battery.
What I noticed while working in Genius Bar people worried about the time of work from the battery of their iOS device, constantly check how many percent remains and how much has changed from the last check. And if you turn on your device two times more often only to check how much charge is left, you practically reduce battery life twice.
Stop worrying about it and enjoy life. There are more important things for which it is worth worrying, rather than the battery charge level. The desire to control the first time can pursue you, but then you get used to this.
Step 7: Go toApple Store.
Update: After the publication, I was notified that the battery testApple. Only worksiPhone 5. and higher
I know, you hate to sign up for reception in Genius Bar, it is loud and crazy, but there is a good reason why I added this item to the list.
As far as I know, Apple added "test for extending life from the battery" to all IOS specialists. This test makes it possible to see a detailed battery usage report in your device. It takes this a few minutes, and as far as I heard, the result is exhaustive. I myself have not seen this test, but friends say that he is good.
There is another likelihood that your battery has a defect, and experts can replace it with free if the device is still on warranty, or very cheap if the warranty is over.
Step 8: Turn on the airin places with a weak cellular signal
One of the main reasons why the battery in your device can quickly sit down - a weak cellular signal. When the iPhone defines that the signal is weakening, it increases the power of the antenna to save the connection to be able to receive calls (basic) and maintain a data transmission connection.
In case you are constantly in a place with one wand or outside the zone, it can quickly destroy the battery charge of your device. Unfortunately, it can happen in more places, which can be initially imagined - any building with metal racks, aluminum buildings, buildings with dense concrete walls, densely populated cities and the city center with many high-rise buildings.
It often happens that you have a strong signal on the upper floors, but simply moving to the lower floors, for example, to a basement, will make your iPhone hold on to this signal, as if all of its existence depends on this, thus quickly devastating the battery. It is worth noting that such a quick battery discharge occurs even if you have a good connection with Wi-Fi signal, because the phone needs a cellular connection for calls and SMS messages (green messages in the message application).
If you are in the zone of a weak signal and you need to receive calls, I have bad news for you - you can't do anything. But if the signal is so weak that you, in any case, can not receive calls, I recommend to turn on the air. You can turn it on if you take your finger up from the bottom edge of the screen to get into the control center and click on the airline icon.
The thing you may not know in the airport, you can enableWi-Fi. Just click on the Wi-Fi icon in the control center (icon to the right of the airline icon). It is ideal for places such as a plane where you have no zone at all, but there is a strong Wi-Fi signal.
In case you are connected to a Wi-Fi point, you can turn off data transmission, such as EDGE, 3G, 4G or LTE. Many people do not know that the phone receives two signals at the same time: one for calls and SMS, the second for data transmission.
The signal level in the iPhone shows only the signal strength for non-transmission data connected, which means that theoretically your iPhone could show 2-3 sticks (or points on iOS 7) for the first connection, and in fact you get 1 wand LTE / 4G / 3G connection, which makes the phone diligently search for connection. To turn off only data transfer on your iPhone, go to Settings\u003e Cellular communication and turn off the data transmission. I repeat, it will give the opportunity to receive calls (if you still have a signal), but to use Wi-Fi to transfer data.
Output
I guarantee that if you follow these tips, you will get the best battery life on your iPhone, iPad or iPod Touch.
If your device still cannot live a whole day, and you are not able to go to the camera noise from stainless steel, which I will call your nearest Apple Store, do not worry. There is hope.
The reason why your phone does not live the whole day may simply be that you are a very active user and your iOS device behaves completely normal under the conditions faced by. The problem is not in the device and not even in you. You simply use the device outside its capabilities. My advice for you is to buy charging into the car, the second charging for work / travel or case-battery to extend the life from the battery.
I hope this article will help you stop worrying about the time of life of your device from the battery and you can enjoy the device that is in your hands. There are many important things in life that deserve our attention, so the less we will be distracted by such little things as the battery life, the more we can spend time on people and problems that are really important.
(4.78 out of 5, rated: 9 )
Website
We have repeatedly touched the question of how to extend the autonomous work of the iPhone and thought it was enough for the eyes. However, the former Apple Store support officer who knows about the work of the iPhone much more than any of us, wrote a stunning article on the phone's battery on his blog, which we give below without bills. I worked in Genius Bar for almost two years and ...Apple releases new versions of its legendary smartphone every year. Since the device itself is complicated, the software developers create increasingly demanding application resources. Already after two or three years, the gadgets are stolen, they start increasingly "to pick up" as the user loads all new releases from the App Store. If you want to squeeze a maximum of your iPhone until Apple presented a new flagship, you can use the following tips from.
1. Peer "under the hood"
Look at how active your device is working and what is the most difficult for him. You may be surprised how many applications are installed unnecessary on your device. Go to the settings, then in the main tab and see which programs take the memory most.
Also make sure that you use the latest version of the operating system - iOS 7. Just to make sure that your gadget has the most relevant means of protection against maliciousness.
2. Delete applications that do not use
On your iPhone for several years a lot of various applications that you use very rarely accumulated. Get rid of them. Think from this as a cleaning in the apartment - if you collect everything from the floor that it is scattered, and throw away - walking around the house will become easier. With smartphones the same story.
3. Disconnect geolocation
Many applications - starting with Google Maps and ending Twitter - determine your location. You can completely disable this feature in the basic iPhone settings or for each application separately. We recommend the first option (settings -\u003e Privacy -\u003e Geolocation Services). Even if you do not want to disconnect geolocation in applications, then close Facebook is one of the most powerful geotoscointing services that greatly load the battery.
4. Disconnect application update
The default background update function is active on iOS 7 and devours the valuable moments of the device's life. It allows applications to work in the background and constantly update the content. You can disable it in the basic settings. Go to Settings -\u003e Main -\u003e Content Update. Here you can completely turn off the function or limit its use for individual programs.
5. Turn off the automatic mail and calendar update
In the settings of mail, calendar and contacts, make sure that the tick is opposite the "manual update" item. Some users include automatic updates, but it slows down the operation of the iPhone.
6. Extra battery life
Covers with built-in battery can extend the life of any gadget. If your iPhone battery is completely weak, you can wear external charge with you. You can speed up the charge recovery process by turning on the iPhone airrest.
7. Disconnect visual special effects
Apple probably spent a lot of time on the creation of a parallax effect for wallpapers creating a pseudo-three-dimensional effect: menu, icons, alerts, slightly changing their kind when tilting devices. The function is quite insignificant, but consumes the processor time. Therefore, we go to the setup address -\u003e main -\u003e universal access and activate the "Reducing Movement" item.
Special chic Apple software shell gives transparency. Many IOS 7 elements are made with the effect of volume - layers above the main interface. In this case, everything that below becomes blurred, as behind the matte glass. You can disable the translucency UI by entering the Settings menu -\u003e Main -\u003e Universal Access -\u003e Increasing Contrast. By default, the switch is in the "Off" position. With a disconnected effect, it works visually faster, especially on not the newest models.
8. Use airrests
By the way, about airport. It will come in handy in places with a weak cellular coating. Since the iPhone is constantly trying to establish a connection to a cellular network, including in areas with low signal level, in the subway or outside the zone of the cellular network, energy consumption increases significantly. At such moments for saving the charge, you can enable on the device of the airline ("iPod mode"). Another option when this feature can be useful - night time. Throughout the night, the smartphone remains active, continuously scanning a cellular network. At this time, it is also useful to include the airline. So you can not only achieve the battery charge savings, but also protect yourself from harmful radiation of the phone, especially if you leave your iPhone at night on a bedside table.
9. Update the latest IOS version
Apple periodically releases software updates to eliminate errors. Some users are afraid to install updates to an outdated device to not load it. However, the practice shows that iOS 7.1 iPhone and iPad began to work much faster than previous releases: the phone reacts faster to actions, in places without irritating pauses. In addition, the transition to the current version of the OS provides protection against vulnerabilities: only in the last update of iOS 7.1.2, Apple has eliminated over 40 security holes.
10. Hard reset
When your iPhone begins to slow down, makes sense to make a rigid reboot. To do this, keep the Home and Power button within a few seconds. It helps free up the device and resources of the device. You can also "roll back" the smartphone to the factory settings from the Settings menu -\u003e Main -\u003e Reset.
